- Lesson Details
- Instructor
- Eric Michael Wilson
- Subjects
- Modeling & Sculpture
- Topics
- Anatomy, Human Figure
- Mediums
- Duration
- 7h 30m 34s
Please note: This course was never completed. It is here for posterity. There is a lot of great information to be gleaned from it, but be aware that it will not be finished. If you would like to finish the course yourself you can continue following along with the NMA 3D Dynamic Anatomy Figure.
In this lesson, you will follow along as Eric constructs an armature, takes measurements, blocks out a simplified planed figure and then begins to “dissect” the musculature of the body in a dynamic pose. This gives you the unique opportunity not only to learn the bones and muscles, but also to see how their forms change in different extreme positions.
4510 views
15 likes
Reference 3D (1)
Free to try
-
1. Lesson Overview
1m 16sNow playing... -
1. An Introduction to the 3D Viewer, Armature Overview and Assembly
29m 50sNow playing... -
1. Preparing the Armature
43m 47sNow playing...
Watch the whole lesson with a subscription
-
2. Building More Organic Shapes. Using profiles and Silhouettes
28m 16s -
3. Refining the Major Planes
36m 57s -
4. Measuring Bone Landmarks and Using Nails to Preserve the Measurements
25m 49s -
5. Continuing to Establish the Bone Landmarks
25m 54s -
6. Blocking in the Planes
27m 14s -
7. Cleaning up the Planes
30m 22s -
8. Finishing the Planes Using Sculpting Techniques
23m 44s -
9. Creating the Centerline and Good Measuring Practice
27m 27s -
10. Refining the Planes and Taking Key Measurements to Check the Work
3m 44s -
11. Cleaning up the Planes and Using the 3D Viewer as an Aid for Sculpting
31m 48s -
12. Adding Mass and Creating the Planes
29m 14s -
13. Initial Clay Block in
25m 39s -
14. Posing the Armature and Creating the Gesture
30m 50s -
15. Mounting the Armature to the Armature Support
28m 43s
CONNECT
New Masters Academy
16182 Gothard St
Huntington Beach, CA 92647
Contact US